NO PINS TO ROTATE


MOVE YOUR BOAT WITH YOUR VEHICLE


Transom Wheels allow a boat to be moved by picking it up and walking it like a wheel barrow. Wheels also can be used in combination with our Tow Bar, the boat can be pulled around by a vehicle in camp grounds, launching areas and boat ramps (not for over the highway—5mph max.) or use with either our Bow Wheel or Bow Tote. The front bow can be raised so that the whole boat is now on wheels for ease of movement by hand.

recreation industries introduced the unique Eide automatic latch Flip-Up Transom wheels over 30 years ago. Tens of thousand wheel sets are in use. Six different models are now available for the various sizes and style boats. All models are rust free aluminum and use the same transom mounting channel and automatic latch, allowing for the inter-changing of wheel sizes and models.

EASE OF USE
No pins to pull out or insert under water to rotate the wheel. Only one pin to attach the wheel to the transom. After a wheel strut is attached, the side of the boat stern when lifted will allow the wheel to swing down and latch automatically. Same for the opposite side. When in the water, moving the latch pin will allow the wheel to rotate up and automatically lock. This can be done by hand or with our accessory Model 3000 Wheel Release to avoid reaching under water. One pin will remove the wheel assembly while in the water or on land.
Only one pin to attach wheel strut
Underwater wheel release option
Channels do not interfere with outboard
Optional Tow Bar for pulling your boat with a vehicle (5 MPH max.)
 
 


Parts can be ordered at 503-653-2833

Semi-Pneumatic
Wide track models for inflatables
Soft Terrain models for soft ground
Most popular 1800-10' pneumatic
Beach Master 15" Flip-up wheels
10" and 15" pneumatic wheels
Optional Bow Wheel

SPECIFICATIONS

MODEL


1200-8 Semi-Pneumatic


1200-10 Semi-Pneumatic

1800-10
1800-10P
Full Pneumatic

19-000-10
19-000-10P
 Soft Terrain

2200-102200-10P Wide Track

2400-15 Beach Master

STRUT

1” X 1½” X  15.75” Alum Tube

1” X 1½” X  17.75” Alum Tube

1” X 1½” X  10.5” Alum Tube & 3/8” X 1” Side Struts

1” X 1½” X  17.75” Alum Tube
 

1” X  1½” X  17.75” Alum Tube
 

 

1” X 1½” X  10.5” Alum Tube &
1/2" X 1"
Side Struts
 

WHEELS

8” X 1.75 Wide Semi Pnue. Plastic Hub

10” X 1.75 Wide Semi Pnue. Plastic Hub


410/350 X 10” Full Pneumatic, Alum. Hub
OR Plastic Hub

410/350 X 10” Full Pneumatic, Alum. Hub OR Plastic Hub


410/350 X 10” Full Pneumatic, Alum Hub OR Plastic Hub


15” Full Pneumatic

15X600-6
 

CHANNEL

12.4” long 6061-T6 Aluminum Extrusion

All Models

MAX-LOAD

200 LB

200 LB

300  LB

250 LB

250 LB

300 LB

AXLE

½” 6061-T6 Alum.

½” 6061-T6 Alum.

½” 6061-T6 Alum.

½” 6061-T6 Alum.

5/8” 6061-T6 Alum.

5/8” 6061-T6 Alum.

SHIP/BOX

5” X 8” X 16”

10” X 10” X 16”

5” X 10” X 20”

9” X 10” X 20”

5” X 10” X 20”

14” X 14” X 14”

WEIGHT

11 LB

15 LB

15 LB

22 LB

12 LB

29 LB


eide boat loader

PO Box 1840, Clackamas,OR 97015, USA
Phone: 503-653-2833
Phone: 503-989-4412
Email: sales@boatloader.com
Request a Boatloader Packet
 


Copyright 2005 Boat Loader, Inc. All Rights Reserved